Bob Smith Industrie (BSI)

130 ULTRA-CURE Tire Glue Medium Thin CA W/Pin In Cap 3/4 oz

This is a 3/4 ounce bottle of Bob Smith Industries ULTRA-CURE Medium CA Tire Glue. Ultra-Cure has a thickness in-between BSI’s Insta-Cure and Insta-Cure+ blends, with a viscosity of 80 cps...

175 IC-LOC GREEN THREADLOCK 1/3oz

177 IC-Loc Purple Thead locker 1/3 oz

305 Teflon Tubing 2Ft

BSI101 Insta-Cure Super Thin 1/2 Oz *

BSI102 Insta-Cure Super Thin CA 1oz *

INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together...

BSI103 Insta-Cure Super Thin CA 2oz *

BSI104 Insta-Cure Super Thin CA 8oz

BSI105 PLASTIC-CURE Odorless Brush-On Gap Filling Cyanoacrylate 1/2 oz

PLASTIC-CURE™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long...

BSI106 Insta-Cure+ Gap Filling 1/2oz *

INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together...

BSI107 Insta-Cure+ Gap Filling 1oz *

INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together...

BSI108 Insta-Cure+ Gap Filling 2oz *

INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together...