Adhesives

BSI210 Finish - Cure 20 Min Epoxy 13oz

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins.

BSI123 Super-Gold Thin 2 Oz

Check out our BSI123 Super-Gold Thin 2 Oz!

BSI206 Slow-Cure 30 Min Epoxy 9oz

Check out our BSI206 Slow-Cure 30 Min Epoxy 9oz!

BSI204 Mid-Cure 15 Min Epoxy 9oz

Check out our BSI204 Mid-Cure 15 Min Epoxy 9oz!

BSI127 Super-Gold+ Gap 1 Oz *

SUPER-GOLD™ and SUPER-GOLD+™ is our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in...

MRS209 Finish-Cure Epoxy 4-1/2

Check out our MRS209 Finish-Cure Epoxy 4-1/2!

PKA55701 PIKO-FIX Plastic Cement 30g

Check out our PKA55701 PIKO-FIX Plastic Cement 30g!

BSI139H Super Gold Pocket 3/4Oz

Check out our BSI139 Super Gold Pocket 3/4Oz!

BSI203 Mid-Cure 15 min Epoxy 41/2 Oz *

BSI152 Insta-Set Refill ACCELERATOR - Foam *

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when...

MRS117H IC-2000 black rubber-toughened cyanoacrylate

Check out our MRS117H IC-2000 black rubber-toughened cyanoacrylate!

BSI130 ULTRA-CURE Tire Glue Medium Thin CA W/Pin In Cap 3/4 oz

Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto R/C car wheels. It is...

DSP-ETC-02 DSPIAE Slow Curing Cement (40ml)

BSI105 PLASTIC-CURE Odorless Brush-On Gap Filling Cyanoacrylate 1/2 oz

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use,...

TES290278 Cement for Plastics 7/8 oz Tube 2 Pack

FEATURES Quick drying cement for plastic models.Joins polystyrene to polystyrene and polystyrene to wood.Also useful for repairing household items made of polystyrene orABS plastics. INCLUDES One 5/8oz Tube of Cement for Plastic Models...

BSI142H FOAM -CURE EPP Foam Glue 4 oz *

Check out our BSI142H FOAM -CURE EPP Foam Glue 4 oz *!

BSI102 Insta-Cure Super Thin CA 1oz *

INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At...

GNZMC129 Mr. Cement S Extra Thin 40ml Fine Gunze Sangyo Mr.Hobby

BSI133 Insta-Cure Pocket .75oz *

Check out our BSI133 Insta-Cure Pocket .75oz *!

175 IC-LOC GREEN THREADLOCK 1/3oz

Check out our 175 IC-LOC GREEN THREADLOCK 1/3oz!

GNZMC127 Mr Cement Economy Deluxe Liquid Cement - 40ml

MC127 MR.CEMENT DELUXE NET：40ml Detail Mr. Cement is a high quality adhesive suitable for your model kits. It is the best choice when gluing together styrene plastic model kit parts. Each bottle contains a handy application brush...

TES281221 Wood & Metal Cement 5/8oz ( TES3505X - 4505 ) *

FEATURES: Strong fast drying cement is specially formulated for joining wood, metal, polystyrene and most rigid plastic. INCLUDES: One 5/8 ounce (18ml) Tube of Cement for Metal and Wood Models. REQUIRES: Applying to both surfaces to be joined, allow to...

TES3503X Testors Wood Cement Extra Fast 5/8 oz

FEATURES: Strong fast drying cement is specially formulated for joining wood. Hot fuel proof, Extra fast drying formula cuts drying time in half from twelve hours to six hours. INCLUDES: One 5/8 ounce (18ml) Tube of Cement for Wood Models. REQUIRES:...

BSI111 Maxi-Cure Extra Thick CA 1/2oz

Check out our BSI111 Maxi-Cure Extra Thick CA 1/2oz!

BSI106 Insta-Cure+ Gap Filling 1/2oz *

INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas,...

BSI101 Insta-Cure Super Thin 1/2 Oz *

Check out our BSI101 Insta-Cure Super Thin 1/2 Oz *!

TES281220 Tube Non-Toxic Plastic Cement 5/8oz. (Cd) (replaces #3523)

RMX39609 CONTACTA Clear Universal Cement 20G

Check out our RMX39609 CONTACTA Clear Universal Cement 20G!

TES3501X Plastic Cement, 5/8 oz

GNZMC124 Mr Cement 23ml Extra Thin Gunze Sangyo

Mr.CEMENT is appropriate for attachment between plastic parts in models (sterol resin plastics). Mr.CEMENT has a suitable adhesion and strong strength because it contains high-quality resins. Contains a brush.

RMX39602 Contacta Tube Plastic Cement 13g

Check out our RMX39602 Contacta Tube Plastic Cement 13g!

BSI312 Replacement Tops fits .5, 1 & 2oz CA Glue Bottles - Each *

Check out our BSI312 Replacement Tops fits .5, 1 & 2oz CA Glue Bottles - Each *!

BSI321 Regular Tip Non-Clog CA Glue Applicator Each

Check out our BSI321 Regular Tip Non-Clog CA Glue Applicator Each!