Adhesives

BSI203 Mid-Cure 15 min Epoxy 41/2 Oz *

BSI152 Insta-Set Refill ACCELERATOR - Foam *

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when...

MRS117H IC-2000 black rubber-toughened cyanoacrylate

Check out our MRS117H IC-2000 black rubber-toughened cyanoacrylate!

BSI119 Insta-Flex Flexable Thin *

Check out our BSI119 Insta-Flex Flexable Thin *!

BSI130 ULTRA-CURE Tire Glue Medium Thin CA W/Pin In Cap 3/4 oz

Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto R/C car wheels. It is...

AMM8181 Ammo Mig Expositor Night Blue Cement

This is a Blue-colour extra-thin cement for use in assembling plastic scale models. Jar of 30 mL.  Hold the parts together, apply the cement to the joint and allow it draw itself into the gap by capillary action. Its blue colour stands out against...

DSP-ETC-02 Dspiae Solvent Based Jelly Cement

BSI105 PLASTIC-CURE Odorless Brush-On Gap Filling Cyanoacrylate 1/2 oz

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use,...

PLS2 Plastic Weld Plastic Solvent Cement -- 2oz 59.1mL *HAZ* - Each* 00002

This is a Plastruct Adhesives "PLASTIC WELD SOLVENT CEMENT" for plastic model builing or other projects. General purpose solvent cement for fast, permanent bonding of most dissimilar plastics. Tactic right away. Within minutes, it sets. ABS bonds...

TES290278 Cement for Plastics 7/8 oz Tube 2 Pack

FEATURES Quick drying cement for plastic models.Joins polystyrene to polystyrene and polystyrene to wood.Also useful for repairing household items made of polystyrene orABS plastics. INCLUDES One 5/8oz Tube of Cement for Plastic Models...

BSI142H FOAM -CURE EPP Foam Glue 4 oz *

Check out our BSI142H FOAM -CURE EPP Foam Glue 4 oz *!

BSI102 Insta-Cure Super Thin CA 1oz *

INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At...